Transfer Android to Xiaomi Poco M3/X3/C3, Restore Data on Xiaomi Poco M3/X3/C3

• Xiaomi POCO M3: Xiaomi POCO M3 adopts a water drop screen design on the front, equipped with Qualcomm Snapdragon 662 SoC processor, built-in 6000mAh large battery, supports 18W QC 3.0, rear 48 million pixel main camera, and with a 2 million pixel macro lens and a 2 million pixel depth of field Lens.
• Xiaomi POCO X3(NFC): Xiaomi POCO X3 series debuted the Snapdragon 732G chip. It has a 64MP Sony IMX682 main camera with f/1.73 aperture and 6P lens. It also has a 13MP f/2.2 ultra-wide-angle camera and two 2MP f/2.4 auxiliary cameras. It is equipped with a large-capacity battery of 5160 mAh and supports 33W fast charge.
• Xiaomi POCO C3: Xiaomi POCO C3 is equipped with MediaTek Helio G35 processor, 3/4 GB LPDDR4x RAM and 32/64GB ROM storage combination, front 5MP lens, rear 13MP main camera + 2MP depth sensor + 2MP auxiliary lens + LED flash square module, the battery capacity is 5000 mAh, but only supports 10W fast charge.

• Part 1 Directly Transfer Data from Android to Xiaomi Poco M3/X3/X3 NFC/C3
• Part 2 Restore Data from Backup to Xiaomi Poco M3/X3/X3 NFC/C3
• Part 3 Export Data from Xiaomi Poco M3/X3/X3 NFC/C3 to Computer

• Part 4 Directly Restore Data on Xiaomi Poco M3/X3/X3 NFC/C3 without Backup
• Part 5 Restore Data from Backup to Xiaomi Poco M3/X3/X3 NFC/C3
• Part 6 Retrieve Data to Xiaomi Poco M3/X3/X3 NFC/C3 with Best Data Recovery

Part 1 Directly Transfer Data from Android to Xiaomi Poco M3/X3/X3 NFC/C3

Mobile Transfer is an all-in-one data migration and data management tool worth recommending. With help of this tool, you can directly transfer all data including contacts, text messages, calendar, pictures, music, videos, call logs, apps, app data, documents and more from any Android smartphone/tablet to Xiaomi Poco M3/X3/X3 NFC/C3 in a click.

           

Step 1. Download, install and run the software, then click on "Phone to Phone Transfer" and press "Start".

Step 2. You need to connect your phones to computer using USB cables, and ensure that the old Android phone is displayed on the left panel, and the Xiaomi Poco M3/X3/X3 NFC/C3 is displayed on the right panel. If you find that their positions are interchanged, you can click the "Flip" button to adjust it.

Step 3. Once your phones are in place, the data that can be transferred in the old phone will be listed one by one. You can select the data type(s) you need to transfer, then tap on "Start Transfer" to sync them to your Xiaomi Poco M3/X3/X3 NFC/C3.

Part 2 Restore Data from Backup to Xiaomi Poco M3/X3/X3 NFC/C3

Step 1. Run Mobile Transfer, then click on "Restore From Backups" and select "MobileTrans".

Step 2. Connect your Xiaomi Poco M3/X3/X3 NFC/C3 to computer via a USB cable, and select a backup file from the list on the left panel.

Step 3. All the restoreable file from the selected backup file will be extracted and displayed, as long as your phone is detected, you can select the file type(s) that you needed, then click on "Start Transfer" to sync them to your Xiaomi Poco M3/X3/X3 NFC/C3.

Part 3 Export Data from Xiaomi Poco M3/X3/X3 NFC/C3 to Computer

Step 1. Run Mobile Transfer and click on "Back Up Your Phone".

Step 3. Wait for your phone is detected, all the backupable file types will be displayed, select the files you wish to back up, tap on "Start Transfer" to sync them to the established save path on your computer.

Part 4 Directly Restore Data on Xiaomi Poco M3/X3/X3 NFC/C3 without Backup

Android Data Recovery is the world's first Android data recovery software has always been a boon for Android users. Thanks to its outstanding data recovery capabilities and strong multi-device compatibility, it is highly praised by users. With the help of this tool, you can easily and directly restore deleted and lost data including contacts, SMS, call logs, documents, photos, music, audio, videos, WhatsApp files and more from any Android phone/SD card/tablet. So, it's a piece of cake for user to restore deleted and lost data on Xiaomi Poco M3/X3/X3 NFC/C3, even if without backup. Next, let's show you how to use this software for data recovery.

           

Step 1. Download and install the corresponding version of Android Data Recovery on your computer, then run it and tap on "Android Data Recovery" on its homepage.

If your phone is connected but not detected successfully, please tap on “Device connected, but can’t be recognized? Get more help.” on current interface to get more help about how to successfully establish a connection.


 

If your device fails to connect, please check if your USB cable is loose, or change another USB cable and press the “Retry” button to try it again.

Or you can try switching USB connection mode to “Transfer files” or “MTP” mode to reconnect your device, if done, tap on "OK".


 

If none of the above reasons, the program will prompt you how to manually enable USB debugging mode on your phone, just follow the prompt to do so, if done, click on "OK" to go to the next step.

Step 3. Once your device is detected, all file types that can be scanned and restored on your device will be showed in the interface. Please select the type(s) as you like and press "Next" to begin scanning your phone.

When the program analyzes and scans your device, you may need to install some firmware to assist in scanning, as well as some authorizations to allow scanning. Please follow the prompts to complete the corresponding operations.

Step 4. Wait for the standard scan is finish, press "OK" to preview all the scanning result. After selecting the files you need, then click on "Recover" to save them all back.

Tips: If you can not find the data you want, tap on the "Deep Scan" button that near the "Recover" button to rescan your device for more lost data.

Part 5 Restore Data from Backup to Xiaomi Poco M3/X3/X3 NFC/C3

Step 1. Return to the primary page of the software, then click on "Android Data Backup & Restore".

Step 2. Connect your phone to the computer using a USB cable, and select a restored option, either "Device Data Restore" or "One-click Restore".

1. If you choose "One-click Restore", after selecting a backup file, click on "Start" to directly restore the whole backup file.


 

2. If you choose "Device Data Restore", after selecting a backup file, clicking on "Start" will only extract all the restoreable file from the selected backup file. Then you need to select the data you wish to restored, and click on "Restore to Device" or "Restore to PC" to save them all back.

Part 6 Retrieve Data to Xiaomi Poco M3/X3/X3 NFC/C3 with Best Data Recovery

Best Data Recovery is one of the few data recovery software on the market that has a positive rate of over 95%. With its help, you can directly recover deleted and lost files like photos, documents, emails, audio, videos and more from mobile phone, computer, hard drive, flash drive, memory card, digital camera, etc. Next, we will use this software to restore the deleted and lost data on your Xiaomi Poco M3/X3/X3 NFC/C3.

           

Step 1. According to your computer's operating system, download and install the applicable version of Best Data Recovery on your computer. At the same time, please connect your Xiaomi Poco M3/X3/X3 NFC/C3 to this computer via a USB cable.

Step 2. Once your device is detected, select the file type(s) as you need and your phone's storage drive (If here have an external SD card, you can also select it together), then click on "Scan" to start a quick scan on your device.